| Products Manufactured By |  |
Logging Duty Encoders - Compatibility Check
Logging
Encoders for Timber Harvester - Denharco - Waratah - Valmet - LogMax - Fabtek - John Deere -
Quadco - Tigercat - Risley - Logging Duty Encoder OEM Replacement
| Serial key Look below to view the logging encoder serial key. Each unique section of the serial number corresponds to a category in the compatibility chart below. 
|
Learn the meaning of each section in the Logging Encoder serial number to:
|
Compatibility Chart
Check the chart below to find out specific information concerning
the technical specifications of our replacement logging duty encoders.
Check the chart below to find out specific information concerning
the technical specifications of our replacement logging duty encoders.
| Head Manufacturer |
Shell Diameter |
Mounting System | Pulse Per Rev (PPR) |
Shaft Diameter |
Shaft Type |
Connector Type |
Replaces MFG Part# |
Suggested Duty |
||||||
| TFT-50z256a |
Fabtek | 50mm (2") |
G/S | 256 | 9.5mm (.375") |
Z | Plug Terminal |
19067 |
Measure | |||||
| TJD-30y125a | John Deere | 30mm | G/S | 125 | 9.5mm (.375") |
Y | M8-4 pin |
FO65063 |
Measure | |||||
| TLM-40y512a |
LogMax | 40mm | G/S | 512 | 6mm | Y | Plug Terminal |
401214HD |
Diameter | |||||
| TLM-58y80a | LogMax | 58mm | G/S | 80 | 6mm | Y | Plug Terminal |
401104HD |
Measure | |||||
| TQC-58y500a | Quadco | 58mm | G/S | 500 | 6mm | Y | M8-4 pin | |||||||
| TQC-58w100a |
Quadco | 58mm | G/S | 100 | 10mm | W | M8-4 pin | |||||||
| TTC-58w500a | Tigercat | 58mm | G/S | 500 | 10mm | W | Plug Terminal | Measure | ||||||
| TVM-50wVTa | Valmet | 50mm (2") |
T | Voltage Output | 6mm | W | 6' Cable |
5052120 |
Saw Position |
|||||
| TWT-50y500a | Waratah | 50mm (2") |
S | 500 | 6.5mm | Y | 6' Cable |
WA106235 |
Measure & Diameter |
|||||
| TWT-50y500b | Waratah | 50mm | S | 500 | 6.5mm | Y | Plug Terminal | WA106235 | Measure & Diameter | |||||
| TXP-50yPRG | Universal | 50mm (2") |
G/S | Set By Operator | 6mm | Y | Plug Terminal |
N/A |
Universal | |||||
| TXP-58yPRG | Universal | 58mm | G/S | Set By Operator | 6mm | Y | Plug Terminal |
N/A |
Universal | |||||
| F |
G |
S | T |
Mount Code |
Shaft Code |
Z |
Y |
X |
W |
|||||
| Flange Mount | Servo Groove |
Screw Mount |
Top Hat |
Slotted |
With Flat |
Hex |
Round |
|||||||
Above, branching off of the compatibility main chart, are two keys indicating the meaning for the serial's shaft code and the mount code. Reference these two keys to determine the meaning of the variables within the key's corresponding columns.
